What did Tokyo Material Week 2026 signal?
Two directions for bio-based packaging appeared during the same week at Tokyo Material Week 2026: Oji showcased bio-based material as an alternative to plastic cushioning, while Cargill announced a bio-based polymer additive approved by the U.S. Food and Drug Administration (FDA), the agency responsible for regulating food and drugs
The two announcements concern different parts of the process. Brands should first ask what function the new material is meant to replace. Bio-based packaging uses biomass as all or part of its feedstock. The term describes the source of the raw material; it does not automatically mean the packaging is compostable or recyclable

How do Oji's and Cargill's new materials differ?
Oji and Cargill's products serve different purposes: Oji's material is intended for packaging cushioning, while Cargill's is an additive used in polymer formulations
・Oji: Showcased bio-based material as an alternative to plastic cushioning. Brands should check whether it meets the protection needs of their actual packaging
・Cargill: Announced a bio-based polymer additive approved by the FDA. Procurement teams should check which uses are covered by the documentation
I'd ask suppliers about the intended use first, then compare materials. Cushioning material needs to protect goods, while an additive needs a clearly defined product application. The source material provides no cost, formulation, or performance data, so these should not be treated as equivalent products for a direct price comparison
Does FDA approval mean the entire package automatically clears compliance?
No. The report says that Cargill's bio-based polymer additive has FDA approval. Brands still need to check that the scope of approval, conditions of use, and intended application match their plans
During procurement, request the approval documents, a statement of raw material origin, and the applicable conditions from the supplier. Then check them against the requirements in the markets where the product will be sold. I would not extend approval for an additive into a compliance guarantee for the finished package
Bio-based describes the source of the raw material. Recyclability and compostability involve different processing conditions. Brands making these sustainability claims should verify the supporting evidence for each one separately, rather than relying on a single set of material documents to support too many claims
Why should the printer be involved too?
The printer needs to take part in validation because the source material specifically raises questions about compatibility with inks and coating materials
Different substrate surfaces can affect ink adhesion, drying, and coating performance. Finishing also needs to be checked using the actual material. The announcement gives no print parameters, so I'd rather run a small print trial with the actual packaging than estimate production performance from how a display sample feels
Before testing materials, clarify who is responsible for what
Brands can start with packaging items planned for launch and assess them step by step, moving from documentation to samples, print trials, and copy
・Check the material documentation first: Confirm the source of the raw material, the additive's intended use, and the applicable documents
・Then test a physical package: Use the actual product to check cushioning, packaging, and protection during shipping
・Next, arrange a print trial: The printer checks ink, coating, and finishing conditions. The brand checks the appearance and labeling
・Finally, verify the claims and versions: Confirm the evidence for bio-based, recyclable, and compostable claims separately, and keep the trial samples and production artwork on file
If a packaging redesign also involves brand catalogs or other custom commercial printing, work with MINDS to review layouts and print specifications for related brand collateral

Key takeaways
・Oji showcased cushioning material, while Cargill announced a polymer additive
・Bio-based describes the source of the raw material. It does not mean recyclable or compostable
・Check FDA approval information against the additive's intended use and applicable conditions
・Ink and coating compatibility need to be confirmed with a print trial using the actual material. A display sample's appearance is not enough to predict production results
Further considerations
Print production teams can record the material version, print-trial conditions, and retained samples on the same job ticket. At the design stage, specify the substrate and coating requirements in the final artwork. Artificial intelligence (AI) tools can help organize supplier documents and flag missing fields, but people still need to check the applicable requirements when making compliance decisions. Software as a Service (SaaS), a model for delivering software over the internet, can store declarations, attachments, print-trial results, and production artwork for easy reference. The next step is to choose one package for a production trial, then decide whether to expand based on the results
Further reading
FAQ
- Can Oji's material directly replace existing cushioning?
- The trade show announcement alone isn't enough to tell. Oji showcased bio-based material as an alternative to plastic cushioning. Its protective performance and fit still need to be checked with the actual product and shipping conditions
- Does Cargill's FDA approval mean the entire packaging material meets FDA requirements?
- No. The report says a bio-based polymer additive received FDA approval. Brands still need to check which uses and conditions the documents cover
- Can bio-based packaging be labeled as compostable or recyclable without further checks?
- No. Bio-based refers to the source of the raw material. Compostability and recyclability depend on different processing conditions, so brands need to verify the supporting evidence for each claim separately
Related articles
The Print × AI weekly
The print and AI know-how designers, brands and enterprises can use before they commit — one email, every week
MINDS Free Tools
AI background removal, a LINE sticker maker, spine & imposition calculators — all free, right in your browser, no upload.
MINDS Group
Need actual printing or gifting services?
From premium printing to online ordering and festive gifts — the MINDS Group sister brands take it from here.





