What workflow controls did ChromaQA 7.5 add?
Datacolor Techkon's ChromaQA 7.5 color quality management suite adds 18 features across Chroma Spec, Chroma Press, Chroma Standards, Chroma Admin, and SmartInk. The update covers color standard setup, on-press measurement, result scoring, and reporting. It also expands support for PantoneLIVE spot color management, Colibri ink sets, SmartInk corrections, and SpectroCheck calibration documents
The practical value I see in this update is that it breaks quality control into settings people can point to: where the target comes from, where on the artwork to measure, how to judge each color's tolerance, and which reports to deliver. The 18 additions are features and extensions. Printers still need to choose the ones that fit their workflow

Why should measurement locations match the artwork?
Chroma Spec templates can now include a PDF or JPG of the actual printed piece. Operators can use it as a visual reference and mark measurement locations on the artwork after selecting a color standard. Color management links a specified color target, printing conditions, and measurement methods so that differences between on-screen designs, proofs, and production prints can be judged against the same criteria
This setting clears up the handoff question, "Where exactly should we measure the color patch?" Packaging artwork often includes a brand color, a background color, and decorative colors. Without measurement points tied to the artwork, the pressroom still has to guess which area represents the specified color. Here, the PDF or JPG is a job reference. It does not replace the color standard or a printed proof
・Check that the artwork used for measurement matches the version of the file sent to print
・Tell your print contact exactly which areas to measure. Don't just send an image of the color patch
Mark the locations first
What does ICC profile import save you?
An ICC (International Color Consortium) profile records how a device reproduces color, giving software a way to describe input and output conditions. Chroma Spec can now import CIELab values and TVI curves directly from ICC profiles. It supports ICC v2 and v4, as well as CMYK and Multichannel profiles
CIELab is a color space that describes color using lightness and two color axes. TVI (Tone Value Increase) describes how printed halftone dots grow. Before this update, templates could draw on Chroma Standards, PantoneLIVE, and GMG OpenColor to create standards. They can now read ICC profiles directly, cutting down on the work of rebuilding color parameters field by field
Importing a profile doesn't tell the designer whether it matches the paper and printing conditions for this job. When sending files, specify which ICC profile is the target. That prevents each side from using a different one when the file contains several profiles

Why can average Delta-E miss a color that's out of tolerance?
Delta-E measures the difference between a measured color and its target. Chroma Admin can now be set up with multiple ScoreCards, or scoring profiles, to apply different acceptance criteria, such as separate rules for internal scoring and brand guidelines. The system can also set a maximum for individual colors, so one color that's out of tolerance isn't hidden by the overall average
Chroma Standards can also assign a Delta-E tolerance to each color, overriding the template's global tolerance. PantoneLIVE standards can specify a light source and observer combination, then use the CIELab values for that combination as the target
One thing I often remind designers during prepress: don't just say "the overall color difference must pass." If the brand mark's color can't shift, call it out on its own and confirm the tolerance and scoring method with the printer
Don't look at the average alone
What should you check before sending design files?
Designers can turn ChromaQA 7.5's features into a short handoff checklist, keeping the target, measurement points, and acceptance results tied to the same artwork. Chroma Press can enable Substrate Opacity in a measurement bar template. Set a target and tolerance, then measure against white and black backings. The results are attached to the job results
After calibration, SpectroCheck can generate a report with reference values, measured values, and Delta-E to help prepare ISO (International Organization for Standardization) conformity documents. That doesn't make the report an ISO certification. Chroma Standards' drawdown report can be adjusted, printed, or saved as a PDF for the end customer
・1. Confirm the ICC profile, color standard, and print conditions all match
・2. Check the artwork version and mark the brand's key colors and measurement locations
・3. Spell out individual color tolerances, opacity requirements, and requested reports in advance
If a custom print job needs its color specifications aligned before proofing, bring the artwork and acceptance criteria to MINDS, a mid- to high-end commercial printer specializing in fully customized work

Key takeaways
・ICC import brings in Lab and TVI values. The target still needs to match the actual printing conditions
・When measurement locations match the artwork, the pressroom doesn't have to guess which color patch to measure
・An average Delta-E cannot replace individual tolerances for key brand colors
・Color reports should state the reference values, measured values, and how the results are judged
A few more thoughts
Print manufacturers can start by listing the color requirements that are still passed along verbally, then add measurement points, individual color tolerances, ScoreCards, and reporting methods to their templates. When sending files, designers should specify the ICC profile and artwork version. If a SaaS or AI workflow will help judge color, make the target source, tolerance rules, and measurement records fixed fields. That way, the record won't end with a color adjustment recommendation and no basis for it. A good next step is to pick a frequently used job with a color-sensitive brand and tune the template against its proof and production results
Further reading
FAQ
- Which ICC profiles does ChromaQA 7.5 support?
- Chroma Spec supports ICC v2 and v4, as well as CMYK and Multichannel profiles. It can import CIELab values and TVI curves
- Do designers need to provide measurement locations when sending files?
- If the printer uses Chroma Spec to build a template, designers should check the artwork version and confirm with their print contact which areas on the artwork need to be measured
- If ChromaQA's average color difference passes, does that mean every brand color passes?
- Not necessarily. ChromaQA 7.5 can set individual color limits and Delta-E tolerances. Confirm the acceptance criteria separately for key brand colors
- How should Substrate Opacity be included in print acceptance checks?
- Enable Substrate Opacity in a Chroma Press measurement bar template, set the target and tolerance, then measure against white and black backings. The results are attached to the job results
- Does a SpectroCheck report mean the job has ISO certification?
- No. The report includes reference values, measured values, and Delta-E, and can help prepare ISO conformity documents. The report alone cannot be used to claim certification
Related articles
The Print × AI weekly
The print and AI know-how designers, brands and enterprises can use before they commit — one email, every week
Tool Library
RGB↔CMYK conversion, ΔE color difference and brand color print analysis — free color management tools, computed right in your browser.
MINDS Group
Need actual printing or gifting services?
From premium printing to online ordering and festive gifts — the MINDS Group sister brands take it from here.





