Why did two red lights appear in one week?
California's packaging rules touch material restrictions, recycling responsibilities and state-level compliance. In a single week, the FPA voiced its opposition to both AB 2253 and SB 1180
The Flexible Packaging Association (FPA) represents the flexible packaging industry in policy discussions and industry coordination. On September 4, 2026, the FPA joined the California Chamber of Commerce and coalition partners in asking Governor Gavin Newsom to veto AB 2253 (Boerner)
That same week, the FPA took similar policy action on SB 1180 (Allen). See the FPA's statement on its AB 2253 coalition letter
State-level packaging compliance means checking materials, labels, recycling responsibilities and evidence for claims against each state's rules, then keeping records that can be traced back to their source
The FPA says duplicative state-level systems could pull California away from global standards and affect implementation of the state's existing SB 54 packaging recycling responsibility framework and multi-substrate recovery frameworks, which govern the joint recovery of different packaging materials
Governor Gavin Newsom later vetoed AB 2253. For more on what that means for recycled-content labels and brand packaging, see AB 2253 Vetoed: Recycled-Content Labels Meet Economic Reality

What should brands watch out for in AB 2253 and SB 1180?
The biggest risk is having one packaging project face several sets of state requirements, forcing changes to materials, recycling information and environmental claims after the design is signed off
The FPA's criticism of AB 2253 centers on duplicative state-level compliance systems. The association says they could pull California away from global standards and disrupt implementation of SB 54 and the existing multi-substrate recovery framework
Extended Producer Responsibility (EPR) is a system in which brands or producers take responsibility for packaging collection and management after it enters the market
Viewed together, SB 1180 and AB 2253 show why brands can't handle material restrictions, recycling and EPR as separate purchasing decisions. The supporting documents need to line up
The FPA also commented on Round 2 of Washington state's rulemaking. That timing is a reminder that state rules move forward in parallel. If a printer keeps only one US version of the artwork and a client asks for changes close to launch, it's usually too late
What should Taiwan brands change first in their print workflow?
Turn each US packaging job from a single global file into a project record with state-specific fields, material evidence and clear version ownership
In my work with brands and print buyers, the most common problem isn't that the design can't be produced. It's that the brief, or project request form, doesn't say which states the packaging will enter, who can approve environmental claims or which document version is valid
In September 2026, the FPA dealt with veto efforts on two California bills while also commenting on Round 2 of Washington's rulemaking. At a minimum, a brand's brief should include three kinds of information:
・Sales states and launch dates, so state requirements are addressed during prepress planning
・Packaging materials, recycling arrangements and environmental claims, matched to supplier information or client approval documents
・Artwork (print-ready file), proofs and the final approver, so design, purchasing and the printer all use the same version history
The design may look the same while the purchase order and recycling documents tell different stories. In the end, nobody is willing to sign off

How do you put the three prepress checks into practice?
The three checks follow this order: check the states, lock down the evidence, then split versions. This brings regulatory questions into the brief, proofing and approval stages
・① Check the states. List California, Washington and other sales markets in the project sheet, and flag questions about AB 2253, SB 1180 and SB 54
・② Lock down the evidence. Keep material information, recycling pathways and environmental copy together in one file. Don't print claims like "recyclable" or "environmentally friendly" without supporting evidence
・③ Split versions. Reuse visuals and specifications where possible, and approve separate labels, materials or copy only when state-specific changes are needed
If a brand is reworking its packaging documents for the US market, it can consider MINDS as a mid-to-high-end, fully custom commercial printing supplier. First, check whether the supplier can keep material information, versions and proofing records together in one project workflow
How will the flexible packaging supply chain recalculate costs?
Cost calculations will shift from the unit price of each printed item to the compliance, versioning and rework risks across the whole packaging project
If a regulation comes up after the design is finalized, a brand may need to redo the artwork, proof it again, split inventory or even delay the launch. Those costs rarely show up in the initial unit-price comparison
I'd start with shared specifications and state-specific document management. Reuse materials and visuals where possible, then create separate versions only for labels or claims that truly need to differ
The FPA's response to two California bills and Round 2 of Washington state's rulemaking in the same week is enough to show that the assumption of one US version is becoming fragile
・One nationwide version: simpler to manage upfront, but state-specific differences can trigger the most rework
・State-specific versions: more documents and proofs, suited to markets where materials or labels really differ
・Shared specifications with state-specific documents: more detailed setup, but usually easier to control who owns each version

Key takeaways
・Address state-level packaging compliance in the brief, not during prepress when documents are already due
・Put AB 2253 and SB 1180 on the same risk map as materials, recycling and EPR
・Find evidence for environmental claims before they go into the artwork
・Reuse specifications where possible, and create state-specific versions only when needed
What to consider next
Before the next US packaging project gets underway, ask the supplier for a quick state-by-state regulatory checklist. Add material certifications, evidence for environmental claims, version approvers and review dates to the purchasing brief. Printing teams should keep version and proofing records, while design teams should treat environmental copy as commercial information that needs supporting evidence. Artificial Intelligence (AI) can help compare artwork versions and flag documents. Software as a Service (SaaS) can store review records. Brands, consultants and legal counsel should confirm which regulations apply. If your team needs a ready-to-use workflow, the Mai Strategy Knowledge Academy consulting team can help build a brief and print submission checklist
Further reading
FAQ
- What is the most direct impact of AB 2253 and SB 1180 on Taiwan brands?
- The two bills show that US packaging compliance is moving toward state-by-state management. Brands need to include materials, recycling, environmental claims and version records in decisions made before sending a job to print, instead of preparing just one version for the entire US
- Why did the FPA call for AB 2253 and SB 1180 to be vetoed?
- The FPA says duplicative state-level compliance systems could pull California away from global standards and disrupt SB 54 and multi-substrate recovery frameworks. The association also commented on Round 2 of Washington state's rulemaking
- What documents should printers prepare now?
- Start with a state-by-state regulatory checklist that records sales states, packaging materials, labels, evidence for environmental claims, the client-approved version and who is responsible for each review
- Can AI or SaaS replace regulatory judgment?
- AI and SaaS can help compare versions, flag documents and keep review records. Brands, consultants or legal counsel still need to confirm how AB 2253 and SB 1180 apply
Related articles
The Print × AI weekly
The print and AI know-how designers, brands and enterprises can use before they commit — one email, every week
MINDS Free Tools
Imposition calculator and preflight file check — free prepress tools, right in your browser.
MINDS Group
Need actual printing or gifting services?
From premium printing to online ordering and festive gifts — the MINDS Group sister brands take it from here.





