Overview
The product case for UV flexo inks is about building German and Swiss ink regulations into the formulation, then validating it against press speed, migration, and odor requirements. SolarFlex FSP from Sun Chemical, a supplier of printing and packaging materials, is one example. When MINDS, a mid- to high-end fully custom commercial printer, plans packaging jobs, it uses Mai Strategy’s three pre-print checks to confirm intended use, color system, and test conditions. For custom packaging planning, contact MINDS

What Do GIO and SIO Require?
The German Ink Ordinance (GIO) and Swiss Ink Ordinance (SIO) are the names of two sets of regulations used as references when evaluating packaging inks. Sun Chemical says its new SolarFlex FSP formulation meets or exceeds both. Low migration means the formulation is designed to reduce the risk of ink components moving from the printed surface into the contents of the package. It still needs to be checked against the actual packaging material and use conditions
SolarFlex FSP is intended for labels, sleeves, and packaging, so buyers can first check whether it fits the job. But a product statement does not mean every packaging structure has been validated. When requesting a quote, specify the packaging use and sales market, and ask the supplier to identify the relevant regulations and supporting evidence. Otherwise, the spec sheet may say only “food packaging” before the job goes to press
How Does SolarFlex FSP Balance Compliance and Press Speed?
UV flexo inks are cured with UV light and used in flexographic printing, often for label and packaging production. SolarFlex FSP’s new formulation is designed for low odor, low viscosity, good printability, and fast curing. These specifications affect shop-floor handling, print quality, and production speed
I put regulatory claims and on-press performance in the same press-trial record, because the deliverable for packaging print is a finished product that can be produced consistently. If the ink does not run reliably under current conditions, compliance statements will not make up for downtime, reprints, or odor issues. SolarFlex FSP’s value depends on whether all of these hold up under the same set of conditions
What Color Systems Does SolarFlex FSP Offer?
SolarFlex FSP offers standard and high-strength four-color process inks, expanded color gamut (ECG) process inks, and high-concentration, single-pigment blending inks. ECG is a process that expands the range of reproducible colors. Sun Chemical says these options can support a wider range of brand colors and packaging needs
Set the route for brand colors before proofing. The designer should provide an approved color sample first. Then purchasing and the printer can agree on whether to use four-color process, ECG, or custom-mixed ink, and compare a press sample printed on the actual packaging material with the finished product. A common disconnect on the floor is that purchasing treats “close” as acceptable, while the brand team signs off only when the color “matches.” SolarFlex FSP’s color options need to match clear color requirements, or the press-trial results will be hard to judge
What Does Validation Above 200 Meters per Minute Tell Us?
Sun Chemical completed press trials and validation for SolarFlex FSP with major European label and packaging customers. These included migration testing and odor assessment at speeds above 200 meters per minute. The company says the results confirm high-speed production capability and compliance with GIO and other relevant regulations and guidance
I treat speeds above 200 meters per minute as a validation case with specific conditions, not a production guarantee that applies to every press, packaging material, and color system. Migration testing and odor assessment are separate checks. One cannot stand in for the other. When requesting a quote, ask the supplier to document the test materials and print conditions, then run a press trial on your own packaging material
What Three Things Should Taiwan’s Small and Midsize Printers Confirm Before Adopting It?
Taiwan’s small and midsize printers considering SolarFlex FSP can use Mai Strategy’s three pre-print checks to organize quote and proofing requirements, so the brand, designer, and printer are working from the same specifications
・1. Use: Confirm whether the job is for a label, sleeve, or other packaging. State the sales market and packaging use, then check the GIO or SIO requirements
・2. Color system: Choose standard or high-strength four-color process, ECG, or single-pigment blending ink, then provide the brand-approved color sample
・3. Validation: Include packaging material, actual press speed, migration, and odor assessment in the press-trial conditions. Ask the supplier to state what uses are covered by its product claims
SolarFlex FSP’s product claims need to match the actual packaging material and test conditions before purchasing can judge whether the ink is suitable. Align the samples, materials, and validation requirements first, so the brand, printer, and ink supplier can check the results against the same specifications

Key Takeaways
・GIO and SIO provide a basis for evaluating the formulation. Buyers still need to check the packaging use and actual packaging material
・SolarFlex FSP is designed for low odor, low viscosity, fast curing, and low migration
・The European customer trials above 200 meters per minute included migration and odor assessments. Their conditions cannot simply be applied to every job
・Set the use, color system, and validation conditions before submitting the job to determine whether the product claims apply
Further Considerations
Printers can put packaging material, press speed, color system, migration, and odor assessment into a single proofing specification. When submitting files, the design team should include an approved color sample and the intended market. Don’t let the words “food packaging” stand in for complete requirements. If you use AI or SaaS to organize quote requests, start by checking for missing information on use, packaging material, color system, and validation data. The supplier still needs to explain its product claims, and the final check is a press trial under actual conditions
Further Reading
FAQ
- What are GIO and SIO?
- GIO is the German Ink Ordinance, and SIO is the Swiss Ink Ordinance. They are regulations used as references when evaluating packaging inks
- What types of packaging can SolarFlex FSP be used for?
- Sun Chemical says SolarFlex FSP is intended for labels, sleeves, and packaging. Check the packaging material and production conditions to confirm whether it is suitable for a specific job
- Does meeting GIO and SIO mean the ink is compliant for all food packaging?
- That cannot be assumed. SolarFlex FSP’s formulation is claimed to meet or exceed both regulations, but its intended use, packaging material, and validation conditions still need to match the actual requirements
- What did the press trial at 200 meters per minute validate?
- Sun Chemical says migration testing and odor assessment were conducted with European customers at speeds above 200 meters per minute. This is a product validation case, not a guarantee that the results apply to every press and packaging material
Related articles
The Print × AI weekly
The print and AI know-how designers, brands and enterprises can use before they commit — one email, every week
MINDS Free Tools
Spine width and imposition calculators — skip the manual math, free in your browser.
MINDS Group
Need actual printing or gifting services?
From premium printing to online ordering and festive gifts — the MINDS Group sister brands take it from here.



