---
title: ePac Installs the Jet Press FP790: A Framework for Tracking Digital Flexible Packaging in Production
lang: en
source: https://mindsprt.dev/en/knowledge/research-epac-first-jet-press/
---

# ePac Installs the Jet Press FP790: A Framework for Tracking Digital Flexible Packaging in Production

*In-Depth Research · 16 min read · 2026-11-15*

> This article examines what the installation of the first Fujifilm Jet Press FP790 at ePac's Phoenix facility can tell us about digital flexible packaging equipment moving from announcement to production. The research combines textual analysis of first-hand industry reporting, the development of Fujifilm's inkjet platforms, and the Ghent Workgroup's prepress standards framework. It also introduces the "Mai Strategy Four Questions for Equipment Deployment" as an analytical tool. The findings show that available public information is enough to assess the partnership structure, technology mix, and regional deployment strategy, but not enough to...

**Quick answer:** This article examines what the installation of the first Fujifilm Jet Press FP790 at ePac's Phoenix facility can tell us about digital flexible packaging equipment moving from announcement to production

## Introduction

The move into volume production for digital printing in flexible packaging is one of the most closely watched structural shifts in the packaging print industry in recent years. Flexible packaging has long been dominated by plate-based processes. As demand grows for short runs, many SKUs, and faster time to market, brands are paying closer attention to the cost and lead-time advantages of plate-free digital printing.

On October 19, 2026, industry media reported that ePac Flexible Packaging would install the first Fujifilm Jet Press FP790 in its fleet at a new facility in Phoenix, Arizona [1]. On the surface, this is an equipment story. In practice, it offers a rare opportunity to observe how a converter built around digital printing is adding a second digital technology alongside its existing platform.

The research gap addressed here is that existing discussion tends to stay at the news level, focusing on phrases such as "first installation" and "strategic partnership." It lacks a framework for separating "facts disclosed" from "claims still to be verified." When the first machine is installed, the industry needs more than a rundown of specifications. It needs to know which questions can be answered now and which must wait for production data.

This article makes the following contributions, each covered in a corresponding section:

・Clarifies exactly what "first" means in the report and where the limits of its disclosure lie, covered in "What 'First' Means and the Limits of Disclosure."

・Breaks down ePac's dual-technology setup, with liquid electrophotography and water-based inkjet running in parallel, covered in "A Dual-Technology Setup."

・Analyzes the relationship between regional capacity placement and lead-time commitments, covered in "Regional Deployment."

・Sets out practical deployment checks from a prepress standardization perspective, then considers what they mean for Taiwan's industry, covered in "Prepress Checks for Deployment" and "Implications for Taiwan's Design and Printing Industry."

This topic matters to Taiwan because most flexible packaging plants there are small or midsize. When evaluating digital capacity, they can be swayed by narratives about a "first installation" or a "global partnership" while key information is still missing. A reusable framework for reading these announcements can reduce information gaps in equipment investment decisions.

## Literature and Industry Review

This section groups the available material into three areas: first-hand industry reporting, the development of Fujifilm's inkjet platforms, and prepress file standardization. Each covers a different level of the issue. The gaps between them are where this article begins.

First: first-hand industry reporting. The report confirms that ePac and Fujifilm have formed a strategic partnership, and that ePac plans to install Jet Press FP790 presses at multiple locations around the world. Phoenix is a new facility and the largest in ePac's network [1]. The report also identifies the FP790 as a water-based inkjet digital press for flexible packaging, while ePac's existing capacity is built on HP Indigo's liquid electrophotography (LEP) technology [1]. This material establishes the partnership structure and the technologies involved, but does not disclose speed, web width, capacity, product range, or the date of formal production. The analysis here builds on the facts that have been disclosed and makes no assumptions about what remains undisclosed.

Second: the development of Fujifilm's inkjet platforms. Fujifilm launched the Jet Press 720 inkjet digital press in Japan as early as 2012, positioning it as a "next-generation" press [3]. From 2012 to the FP790's arrival at a flexible packaging production facility in 2026, the Jet Press brand has evolved over roughly 14 years. This time span suggests that extending inkjet digital printing from commercial paper printing to flexible packaging substrates was not a short-term technological leap. However, the available literature does not explain the technical relationship between the Jet Press 720 and the FP790, so this article does not draw a direct link between them.

Third: prepress file standardization. The Ghent Workgroup (GWG) is an international industry organization focused on prepress and PDF file exchange standards [4]. Its specifications overview brings together file requirements for different print applications [5]. These materials do not address any one piece of equipment, but they are directly relevant to deployment: regardless of the printing technology, files must be handled consistently before production can begin. This article uses these standards in the checks set out in Section 6. They complement the first two areas, which focus on the equipment itself.

Research gap. These three areas answer "Who is partnering with whom?", "Where did the equipment come from?", and "How are files exchanged?" None answers "Under what conditions can the first installation of a press be considered a real deployment?" In addition, searches of academic databases using terms such as "Phoenix" and "press" return food science research on date (Phoenix dactylifera L.) press cake [2]. This suggests that the topic currently has little dedicated academic literature, and that noise outweighs useful results in academic searches. This article therefore uses the "Mai Strategy Four Questions for Equipment Deployment" as its framework: disclosure limits, technology mix, deployment logic, and prepress integration.

## What "First" Means and the Limits of Disclosure

In this case, "first" means the first press in ePac's own FP790 fleet. It does not establish a market-wide ranking. The report says ePac will install "the first of its fleet" [1]. That wording limits the reference point for "first" to the order of ePac's internal deployments.

The distinction between "first in a fleet" and "first in the world" matters methodologically. The former describes one converter's adoption timeline. The latter concerns the equipment supplier's progress in the market. Conflating the two can make one company's deployment decision look like evidence that the entire market has matured.

The report does not disclose the press's speed, capacity, product range, or formal production date [1]. Because those details are missing, there is no first-hand basis for comparing the FP790's capacity with existing digital or conventional processes. This article therefore marks those points as "still to be verified" instead of filling the gaps with general claims from the supplier.

The limits of disclosure are themselves worth analyzing. News of a first installation often announces the partnership and location first, with performance figures coming after production begins. In this analysis, the installation announcement is a "statement of commitment," while the first production cases and customer feedback count as "performance evidence." The two may be separated by several months or more.

・Disclosed: partnership, installation location, technology type, and facility positioning [1].

・Not disclosed: speed, web width, capacity, product range, and production date [1].

・Reading principle: do not fill undisclosed details with estimates.

## A Dual-Technology Setup: Existing LEP Capacity and New Water-Based Inkjet Capacity

The most analytically useful aspect of ePac's move is that it is not replacing an existing technology with inkjet. It is adding a water-based inkjet line alongside its LEP capacity. The report explicitly describes the FP790 as a "complement" to ePac's existing HP Indigo LEP capacity, extending its product offering through industrial-scale water-based inkjet digital printing [1].

The word "complement" defines the relationship between the two technologies as parallel rather than substitutive. A converter founded on digital printing choosing to run two technologies side by side may mean its orders now include segments that one technology cannot readily serve at once, such as different run lengths, substrate types, or cost structures. The report does not explain how work will be divided, however. That remains an inference to be checked against future production information.

A dual-technology setup brings specific production management challenges. Color reproduction, ink systems, and compatibility with downstream finishing may differ between the two processes. If different SKUs for the same brand are printed on different technologies, color consistency becomes a cross-press issue. In this analysis, that makes color management and prepress standardization more important than at a facility using only one technology.

From the equipment supplier's perspective, installing the FP790 at a facility that already uses LEP puts water-based inkjet in direct comparison with a mature digital technology in the same plant. That is a tougher comparison than entering a conventional plate-based print shop. The user already knows the lead-time and short-run advantages of digital printing, so the evaluation will focus on quality consistency, unit cost, and capacity.

## Regional Deployment: Location Is Part of the Lead-Time Promise

Placing the first FP790 at Phoenix is a deployment decision that uses geographic proximity to shorten lead times. The report says the Phoenix facility was established to meet growing demand for digitally printed flexible packaging in the southwestern United States and to bring faster lead times closer to brands [1].

The "largest facility" and the "first new press" are both in Phoenix [1]. Together, these details suggest the technology is being placed at a site expected to handle the greatest demand, rather than on a small experimental line. This analysis finds that the choice raises both the risk and the pace of learning: if the press performs consistently, the largest facility can build production data quickly. If it falls short, the impact will be felt at one of the network's most important sites.

ePac CEO Virag Patel describes the model as a "regionalized presence," or "putting the right technology in the right geography" [1]. The analytical point is that ePac treats the choice of technology and the choice of location as one decision, rather than buying equipment first and looking for a market afterward.

The report also says that local facilities can give nearby brands faster shipping, local support, and a quicker path to launching new products [1]. In this analysis, shorter lead times in digital flexible packaging come not only from printing without plates, but also from the logistics distance between a facility and its brands. Printing technology and supply chain geography together shape the service promise.

## Prepress Checks for Deployment

Whether a press is truly deployed ultimately shows up in prepress: can files be converted into acceptable finished products consistently and predictably? The Ghent Workgroup focuses on prepress and PDF file exchange standards [4], and its specifications overview brings together file requirements for different print applications [5]. Standards like these provide a common language when new equipment is added to an existing workflow.

This analysis finds that a first digital flexible packaging press should pass at least three prepress checks:

・First, can the new press use the same file specifications as the existing digital lines, or will it need separate rules for bleed, white ink, and spot color?

・Second, are color targets aligned across the two technologies, so the same brand does not show visible color shifts between presses?

・Third, is the automation for variable data and multi-SKU imposition good enough to support short-run production?

All three checks depend on actual production data, not a supplier's specification sheet. The report discloses no information about ePac's prepress workflow [1], so this article cannot assess its current performance on these points. They remain indicators to watch.

Including prepress in equipment evaluation corrects a common blind spot: the industry tends to compare presses by speed and web width while underestimating the rework caused by inconsistent files. In this analysis, for flexible packaging with many SKUs and short runs, losses from prepress inconsistency may affect unit cost before differences in print speed do.

## Implications for Taiwan's Design and Printing Industry

When assessing water-based inkjet capacity for flexible packaging, Taiwan's industry should first establish its own order data and file specifications, then evaluate overseas first-installation cases. The implications for three groups follow.

Small and midsize printers should first review their order mix from the past 12 months: number of SKUs, distribution of run lengths, share of rush jobs, and reprint frequency. This information can show whether there are enough orders to support digital capacity, rather than having to infer demand from equipment specifications. In practice, printers can complete this review over one quarter and track the prepress correction time for each job at the same time. That will provide a baseline for comparing digital and conventional processes later. They should also record "disclosed" equipment details separately from those "still to be verified," and wait for production data before moving to quoting and press trials.

Designers will face more short-run and multi-version projects, along with stricter requirements for file consistency. Digital flexible packaging lets a brand launch multiple flavors or regional versions at once. Designers need to separate shared and variable elements at the file level and submit files according to the printer's PDF specifications. For a first project with a printer, they should ask for the file requirements and color targets instead of relying on handoff habits from offset printing or folding carton packaging.

Brands should first clarify whether they are buying a printing technology or lead-time capability. ePac's case shows that faster lead times come from both digital technology and facility location [1]. When evaluating suppliers, Taiwan's brands can ask which technology will be used for each SKU, how color consistency is verified, and what the supplier's actual rush-job lead-time record looks like. A brand can also use a small batch of a new product for its first test, then observe quality consistency over a three-to-six-month launch cycle before deciding whether to shift more work.

## Conclusion and Limitations

This article asks what the first Jet Press FP790 installation at ePac's Phoenix facility can tell us about the deployment of digital flexible packaging equipment. The available public information supports three conclusions: "first" refers to the order of deployment within ePac's fleet, water-based inkjet complements rather than replaces existing LEP capacity, and the new press is being placed in the region with the greatest demand [1].

The same information is not enough to assess press performance. Speed, capacity, product range, and production date have not been disclosed [1]. Any conclusion about the FP790's performance in production must wait for further data.

This article has the following specific limitations:

・Data period: The first-hand source is a single report dated October 19, 2026 [1]. It covers the installation announcement, not the production period, so this article cannot assess actual operating performance.

・Source coverage: This article did not obtain Fujifilm's official technical documentation, feedback from ePac customers, or third-party test data. The evidence for the development of Fujifilm's platform is limited to the 2012 Jet Press 720 launch record [3], which is not enough to establish a technical lineage between the two press generations.

・Limits on extrapolation: ePac is a converter built around digital printing. Its decision to run two technologies in parallel and its regional deployment strategy cannot be directly applied to traditional flexible packaging plants centered on flexographic printing or gravure printing.

The next steps for research are practical: track the capacity and product information disclosed after the Phoenix facility begins formal production, then compare what was disclosed at announcement with what becomes available during production; collect the installation sequence for FP790 presses at ePac's other sites to see whether "largest facility first" is a consistent strategy; and use order data from Taiwan's small and midsize flexible packaging plants to build a break-even model for digital capacity.

## Key Takeaways

・In the report, "first" means the first press in ePac's own FP790 fleet. It should not be read as a measure of market maturity.

・ePac describes water-based inkjet as a complement to its existing HP Indigo LEP capacity. Running both technologies makes color consistency a cross-press management issue.

・The first press is going into ePac's largest new facility, suggesting that technology choice and regional lead-time planning are being treated as one decision.

・An installation announcement is a statement of commitment. Performance evidence such as speed, capacity, and production date still has to emerge during the production period.

・Before evaluating digital flexible packaging capacity, Taiwan's businesses should review their own order mix and prepress requirements, then assess overseas cases.

## Further Questions

This case offers a lesson for print manufacturing: competition in digital flexible packaging has shifted from comparing individual presses to planning the overall mix of technologies and facility locations. Converters need to base capacity investments on order data, not specification sheets. Design teams will see more multi-version, short-run work. Files should be structured in advance to separate shared and variable elements, then handed off according to the printer's PDF specifications. A practical entry point for AI is prepress, such as automatically checking files against specified requirements or predicting which SKUs suit which printing technology. That work first requires enough production and rework data to train on. On the SaaS side, plants running both technologies have a clear need for cross-press color management and job allocation systems. Whether tools already exist that can connect to both LEP and water-based inkjet workflows remains an open question. Another question to watch is whether the production data ePac discloses later will support a unit-cost advantage for water-based inkjet in short-run flexible packaging.

## References

[1] [ePac Becomes the First Site for the Fujifilm Jet Press FP790: What to Watch as Digital Packaging Equipment Goes into Production](https://www.thepackagingportal.com/industry-news/epac-phoenix-is-first-with-fujifilm-jet-press-fp790/)

[2] Sheir M. (2022). [Innovative use of date (Phoenix dactylifera L.) press cake in the food industry](https://doi.org/10.21603/2308-4057-2022-1-2-9). Foods and Raw Materials. DOI: 10.21603/2308-4057-2022-1-2-9

[3] [Next-generation Fujifilm inkjet digital press Jet Press 720 launched in Japan](https://doi.org/10.1108/prt.2012.12941caa.007). Pigment &amp; Resin Technology. DOI: 10.1108/prt.2012.12941caa.007

[4] [Ghent Workgroup: Official GWG Website](https://gwg.org/). Ghent Workgroup

[5] [Ghent Workgroup: Overview of GWG Specifications](https://gwg.org/specifications/). Ghent Workgroup

## FAQ

### Is the Fujifilm Jet Press FP790 installed at ePac Phoenix the first in the world?

The report says it is the first press in ePac's own FP790 fleet, installed at its new facility in Phoenix, Arizona. "First" describes ePac's internal deployment order and should not be read as a global market ranking.

### What type of press is the Jet Press FP790?

The Jet Press FP790 is Fujifilm's water-based inkjet digital press for flexible packaging. The public report does not disclose its speed, web width, capacity, or formal production date.

### Will ePac's FP790 installation replace its existing HP Indigo presses?

No. The report explicitly describes the FP790 as a complement to ePac's existing HP Indigo LEP capacity. ePac will run two digital technologies in parallel: liquid electrophotography and water-based inkjet.

### Why did ePac choose Phoenix for the first FP790 installation?

Phoenix is ePac's newest and largest facility. It was established to meet demand for digitally printed flexible packaging in the southwestern United States and to shorten lead times and shipping distances for brands. This suggests ePac treats technology placement and regional deployment as one decision.

### What should Taiwan's flexible packaging plants look at first when evaluating digital printing equipment?

They should review their own SKU counts, run-length distribution, share of rush jobs, and prepress rework hours from the past year to see whether they have enough orders to support digital capacity. Performance data from a first installation overseas often appears only after production begins, so announcement-stage information should not be used as the basis for an investment decision.


---

> HTML version: https://mindsprt.dev/en/knowledge/research-epac-first-jet-press/
> MINDS — 麥思印刷整合有限公司 · https://mindsprt.dev
