---
title: UV Flexo Ink Compliance: Lock Down 3 Specs Before Handoff
lang: en
source: https://mindsprt.dev/en/knowledge/gio-compliant-flexo-inks/
---

# UV Flexo Ink Compliance: Lock Down 3 Specs Before Handoff

*File Preparation · 5 min read · 2026-11-18*

> SolarFlex FSP builds GIO and SIO requirements into its UV flexo ink formulations and has undergone migration and odor assessments at high press speeds with European customers. The Three Prepress Checks summarize the intended use, color system, and validation conditions to lock down before handing off files

**Quick answer:** UV flexo ink compliance must be checked against the formulation, packaging material, and production conditions. SolarFlex FSP says it meets GIO and SIO requirements. The Three Prepress Checks cover intended use, color system, and actual test conditions

## Why build compliance into UV flexo ink specs?

UV flexo inks can build GIO and SIO requirements into their formulation specs, giving designers a chance to confirm their ink selection before finalizing artwork. The German Ink Ordinance (GIO) and Swiss Ink Ordinance (SIO) are regulations to consider when printing inks are used for food packaging. In October 2026, Sun Chemical introduced a new SolarFlex FSP formulation that it says meets or exceeds both sets of requirements. Ingredient selection and low-migration performance are intended to reduce the risk of migration, flavor transfer, and off-odor contamination.

Low migration means controlling the risk of ink components moving from the printed layer into the contents of a package. Assessment needs to account for the substrate, printing and curing conditions, and packaging use. The ink name alone is not enough. I'd break the handoff checks into three parts: intended use, color system, and validation conditions. The product is listed for labels, sleeves, and packaging, but each finished application still needs to be checked on its own.

## What should designers confirm before handing off files?

Before handing off files, designers should lock down the intended use and substrate. That's the first of the Three Prepress Checks. SolarFlex FSP is intended for labels, sleeves, and packaging, but that doesn't mean one formulation can be used as is with every material or contact scenario. At a minimum, the print handoff sheet should include the following:

・Three Prepress Checks, intended use: Specify the finished format and substrate.

・Three Prepress Checks, formulation: Specify the SolarFlex FSP UV formulation, and ask the converter to confirm the exact product and its GIO and SIO requirements.

・Three Prepress Checks, testing: Confirm that migration and odor assessments cover the substrate, printing process, and curing conditions.

Even if a revision changes only the copy or color, ask the converter to confirm that existing tests still apply. If the substrate or formulation changes, an old PDF cannot replace a fresh check. Designers don't need to interpret regulations, but they should include the conditions the converter needs to answer in the handoff sheet.

## Do color choices change the artwork specs?

Set the color system before finalizing the artwork. That's the second of the Three Prepress Checks. SolarFlex FSP offers standard and high-strength four-color inks, expanded color gamut (ECG) process inks, and high-strength mono-pigmented blending colors. Expanded color gamut uses different combinations of process inks to extend the printable color range. Having those options does not mean a brand color can be reproduced without proofing.

・Three Prepress Checks, color system: Specify standard four-color, high-strength four-color, ECG, or blending colors.

・For a spot color, confirm the ink and proofing method with the printer first.

・After revising and exporting the artwork, check that the separations match the approved file version. Don't approve a new file using an old proof.

If a label design's brand color changes in the final round, update the color requirements on the proofing sheet too. If the PDF changes but the handoff details don't, the printer may still prepare ink using the old settings.

## What do tests at 200 m/min tell you?

High-speed tests offer a reference for production capability, but they don't guarantee the same results for every packaging setup. That's what the third of the Three Prepress Checks needs to address. Sun Chemical says SolarFlex FSP completed press trials and validation with European label and packaging customers, including migration tests and odor assessments, at speeds above 200 m/min. The product also addresses high-speed production needs with low viscosity, fast curing, and low odor.

I'd treat that speed as a signal from a production trial, not a guarantee for my own line. When sending samples, give the converter the substrate, color system, and expected press speed, and ask them to confirm the actual curing conditions and validation scope. If the film or formulation changes, ask again whether the previous tests still apply.

## How can Taiwan-based designers check a handoff before sending it?

Designers in Taiwan can include the Three Prepress Checks in their pre-handoff review so the compliance details travel with the files.

・Three Prepress Checks, intended use: Label, sleeve, or packaging, with the substrate listed.

・Three Prepress Checks, color system: Standard four-color, high-strength four-color, ECG, or blending colors.

・Three Prepress Checks, validation: Migration, odor, actual press speed, and curing conditions.

・Three Prepress Checks, version: Keep the approved PDF, substrate, ink color settings, and test results on file.

After revising the artwork, changing the substrate, or exporting a new PDF, go through this list again. That helps prevent an old proof from being used to sign off on changed specs. If the packaging visuals also carry over to catalogs, brand manuals, or other custom commercial print work, you can talk with MINDS about specs for mid-to-high-end, fully customized commercial printing. Migration and odor assessments for the packaging itself still need to be validated under actual production conditions.

## Key takeaways

・Once GIO and SIO requirements are part of the ink selection specs, designers should confirm the formulation and intended use before finalizing the artwork.

・SolarFlex FSP covers four-color, ECG, and blending colors. The print handoff sheet should say which system to use.

・Tests above 200 m/min are a reference for production. They don't replace validation with your own substrate and conditions.

・Keep the PDF version, substrate, color system, and test results together so you can check them after revisions.

## Further thoughts

A printer can put regulatory requirements, ink formulation, substrate, color system, press speed, and test results on a single version-controlled spec sheet. Each time a designer submits a new PDF, AI or SaaS can flag missing fields and version differences. It can't determine compliance from the words "food packaging" alone. I'd first have the workflow record which file version goes with which ink and substrate, then consider automated comparisons.

## Further reading

・[Sun Chemical launches SolarFlex FSP UV flexo inks that meet GIO requirements](https://www.thepackagingportal.com/industry-news/upgraded-uv-inks-meet-and-exceed-gio-and-sio-regulations/)

## FAQ

### Which regulations does SolarFlex FSP UV flexo ink comply with?

Sun Chemical says the new formulation meets or exceeds the requirements of the German Ink Ordinance (GIO) and Swiss Ink Ordinance (SIO).

### Do the 200 m/min SolarFlex FSP tests mean my line can run at that speed too?

Migration and odor assessments with European customers were completed at speeds above 200 m/min. These results are a production reference for the conditions tested, not a guarantee for every press or substrate.

### Does using ink that meets GIO and SIO automatically make the finished package compliant?

No. The ink name alone is not enough. You also need to check the actual substrate, printing and curing conditions, and whether the migration and odor assessments apply.

### What should designers confirm before sending files to print?

The handoff sheet should specify the packaging use, substrate, ink, and color system. Ask the converter to confirm the actual press speed, curing conditions, and relevant tests.


---

> HTML version: https://mindsprt.dev/en/knowledge/gio-compliant-flexo-inks/
> MINDS — 麥思印刷整合有限公司 · https://mindsprt.dev
