---
title: Simplifying Narrow Web Printing: Three Things to Check Before Sending Artwork
lang: en
source: https://mindsprt.dev/en/knowledge/flint-group-narrow-web-simplification/
---

# Simplifying Narrow Web Printing: Three Things to Check Before Sending Artwork

*File Preparation · 6 min read · 2026-10-08*

> At LOUPE Americas 2026, Flint Group brought simplicity to narrow web printing through inks, coatings, and an online platform. From shrink sleeve white ink and UV LED conversions to color handoffs, designers can check key file details first and see which decisions need the printer's confirmation

**Quick answer:** Simplifying narrow web printing means making inks, coatings, and online support work with existing production lines. MINDS recommends that designers align packaging use, white ink requirements, and curing method before sending files

## What did Flint Group present at LOUPE Americas 2026?

Flint Group is simplifying narrow web printing by integrating inks, coatings, and an online platform. Narrow web printing refers to production lines that print labels or packaging continuously on narrow rolls, then move on to finishing steps such as die cutting and slitting.

Flint Group's announcement lists Booth 5821 and plans to showcase a range of solutions designed to work with existing production lines, with the aim of reducing operational complexity while maintaining consistent print quality. The company has also expanded its positioning from ink supplier to packaging solutions provider, with products spanning UV and water-based inks and coatings.

When I look at solutions like these, I first ask whether they make the choices clearer. If each application requires a fresh round of trial and error with inks, coatings, and operating conditions, it's hard for the design team to hand over everything in one go. That's why Flint Group puts "simplicity" at the center of its narrow web innovation story.

## What should designers check first about shrink sleeve white ink?

Choosing white ink for shrink sleeves starts with checking the shrink requirements, opacity target, and printer's equipment. A shrink sleeve is a film label printed as a tube, placed over a container, then heat-shrunk to fit.

Flint Group's EkoCure Fast Cure Ultralow COF Shrink White is positioned as a dual-cure white ink printed last for low-to-medium shrink applications. Dual-cure means the product supports two curing methods. The actual setup should be confirmed against the equipment and technical data. White ink printed last is the final white ink applied in the printing sequence.

COF (Coefficient of Friction) describes the resistance between surfaces as they slide against each other. A low COF means less resistance to sliding. Flint Group says the product's high opacity, fast curing, and ultra-low COF can help reduce ink buildup on sleeve equipment while maintaining repeatable printing and converting performance.

・State the opacity the white ink needs to achieve. Don't just drop a white swatch into the artwork.

・If greater whiteness is needed, ask the printer whether to print the white ink in overlapping passes. Flint Group says this product can be printed that way to increase opacity.

White ink isn't just a swatch on a screen. The finished piece has to be considered alongside the film and shrink conditions.

## What can't you guess when switching to UV LED or printing food packaging?

When changing curing methods or printing for food packaging, the design team should spell out the intended use and production line conditions first, then ask the printer to confirm the ink and documentation. UV LED (ultraviolet light-emitting diode) curing uses ultraviolet light from LEDs to cure inks or coatings.

Flint Group says its EkoCure UV LED systems are already operating around the world, and presents them as a practical route for switching from conventional UV curing. This is the supplier's description of its system. An artwork file still can't replace checks on equipment, materials, and curing conditions.

Flexocure LEAP for food packaging is Flint Group's new conventional UV ink technology. It uses a new resin platform designed to reduce the risk of photoinitiator migration. Photoinitiator migration means that photoinitiators in the ink may move toward the packaging's contact side. Reducing that risk doesn't amount to a regulatory determination.

Ask the printer first

Put the food packaging use, contact surface, and packaging structure in the handoff notes, then request the relevant technical documentation. Don't assume from the ink name alone that the finished product meets every condition of use.

## How can FlintLink and VIVO Colour Solutions reduce guesswork in prepress?

FlintLink brings together documents, order status, troubleshooting, and remote technical support, while VIVO Colour Solutions helps with color management. They handle different kinds of information in day-to-day handoffs.

FlintLink is Flint Group's business-to-business customer portal, with round-the-clock access to documents and order information. When artwork is revised, the person sending files can check the right version, find technical documents, or reach the support team sooner. That saves a round of back-and-forth over which version is current.

VIVO Colour Solutions is an end-to-end color management platform. Flint Group says it can reduce guesswork in color matching, shorten prepress preparation time, and reduce substrate waste. That doesn't mean the platform can make every material look the same. The printer still needs to confirm proofing conditions and how colors will be approved.

That's where SaaS earns its keep: putting documents, orders, and support in one searchable place, so each handoff can be matched to the right version of the information. The design team should also mark the approved artwork and color requirements. Don't send a PDF just because its filename looks close.

## What three things should designers check before sending files?

MINDS (mid-to-high-end fully custom commercial printing) recommends checking narrow web files against three handoff questions: What is the packaging used for? What does the white ink need to achieve? Which curing method will the printer use?

・1. Packaging and intended use: Identify the material, whether it's a shrink sleeve or standard label, and whether it's for food packaging.

・2. White plate and color: Specify the white ink opacity target, whether overlapping passes are needed, and include an approved color reference.

・3. Production line and files: Confirm curing conditions with the printer, such as UV or UV LED, then check the final artwork version, separations, and handoff documents.

Don't skip this step. When exporting a new PDF after revisions, check the text and bleed, and make sure the white separation hasn't carried over from an old version. Leave the decision about overprinting white ink to the printer, based on the equipment and product requirements.

If the job falls within custom commercial printing, contact MINDS to confirm the available printing services and file delivery process. For narrow web labels, the actual printer and technical supplier should check ink and curing compatibility.

## Key Takeaways

・Simplifying narrow web printing starts with the existing production line and the actual packaging use.

・Set the opacity target for shrink sleeve white ink first, then confirm whether overlapping passes are needed.

・UV LED conversions and inks for food packaging both require checks on equipment, materials, and technical documentation.

・A color platform can reduce guesswork, but the printer still needs to confirm color approval and proofing conditions.

## Further Thoughts

Printers can make packaging use, white ink requirements, and curing method required questions when taking a job. Designers can include the same information in their final artwork notes to reduce cases where the file version and white plate no longer match after revisions. AI can help compare file versions and flag missing fields, but it can't replace the printer's judgment on inks, curing, and food packaging conditions. If a SaaS platform lets both sides access the same documents and order status, day-to-day handoffs become clearer.

## Further Reading

・[Flint Group presents narrow web printing solutions at LOUPE Americas 2026](http://www.flintgrp.com/news-and-events/news/flint-group-packaging-solutions-puts-simplicity-at-the-centre-of-narrow-web-innovation-at-loupe-americas-2026/)

## FAQ

### Is EkoCure Fast Cure Ultralow COF Shrink White suitable for every shrink sleeve application?

Flint Group positions it for low-to-medium shrink applications. The printer should assess applications with higher shrink requirements based on the film, equipment, and printing conditions.

### Does the global use of UV LED systems mean we can switch equipment or inks right away?

Flint Group presents its EkoCure system as a practical route from conventional UV to UV LED, but an actual conversion still requires checks on the production line, materials, and curing conditions.

### Can Flexocure LEAP guarantee that food packaging complies with regulations?

Flint Group says its resin platform is designed to reduce the risk of photoinitiator migration. Product information can't replace checks on the finished product's use, packaging structure, and applicable regulations.

### What should designers check before handing over narrow web label files?

First identify the packaging use, white ink opacity requirements, and curing method. Then check the final artwork version, white plate separations, and approved color reference.


---

> HTML version: https://mindsprt.dev/en/knowledge/flint-group-narrow-web-simplification/
> MINDS — 麥思印刷整合有限公司 · https://mindsprt.dev
