--- title: 3 Upgrade Priorities for BOBST Post-Press Lines lang: en source: https://mindsprt.dev/en/knowledge/bobst-interpack-2026-future-packaging/ --- # 3 Upgrade Priorities for BOBST Post-Press Lines *Printing Knowledge · 5 min read · 2026-10-08* > Post-press integration is often seen as a matter of adding equipment. What really affects lead times is whether materials, job changeovers and handoffs between production stages work together. BOBST is bringing supply chain partners together at Interpack 2026. Here are the points Taiwan printers and brand buyers can check first **Quick answer:** At Interpack 2026, BOBST is focusing on collaboration among equipment, materials and converting partners. MINDS (MS) recommends checking material compatibility, changeover workflows and data handoffs before upgrading a post-press line ## Why is BOBST bringing the supply chain onto the show floor? BOBST is bringing the supply chain onto the show floor to get equipment, materials and converting partners talking about the same production challenges. Interpack 2026, the packaging and processing trade show in Düsseldorf, Germany, runs from May 7 to 13, 2026. BOBST plans to showcase four packaging segments: ・Labels ・Flexible packaging ・Folding cartons ・Corrugated board These products use different substrates and converting methods, yet brands often expect the same quality, version control and delivery timelines across all of them. A joint showcase gives buyers a chance to see which technology combinations are worth asking about. It is still a trade show setup, though, and should not be taken as proof that every printer has adopted the same standard workflow. [BOBST announcement](https://www.bobst.com/eu/en/news/1773842402-bobst-unites-with-industry-partners-at-interpack-2026-to-showcase-the-future-of-packaging-production) ## What kinds of collaboration will Interpack 2026 showcase? BOBST's program puts the focus on joint development, shared samples and demonstrations tailored to specific requirements. At 16:00 on May 8, BOBST and Michelman, its chemical materials partner for this collaboration, will discuss research and development related to the PPWR (Packaging and Packaging Waste Regulation). Several materials and technology partners are contributing to the shared samples. BOBST has also scheduled a session with Reifenhäuser, its co-host for the evening event, on May 12. At the Bielefeld Packaging Center, BOBST's packaging demonstration center in Bielefeld, visitors can see in-person or online demonstrations designed around specific substrates, applications and production conditions. When reviewing a sample, first ask about the substrate and processing conditions. That's how you'll know whether the result could work for your own jobs. ## What should smaller Taiwanese printers ask before upgrading a post-press line? Smaller printers should check material compatibility, changeover methods and whether job data can be handed off before looking at top speed. A post-press line connects finishing equipment, material requirements and job information in a workflow that can be handed from one production stage to the next, with each stage working to the same specifications. BOBST has scheduled sessions in Bielefeld on production profitability and practical operations. It has also introduced Demo 3.0, a machine demonstration centered on changeovers, using a first pull right method, where the first sheets after a changeover meet the set requirements. ・If a material or coating changes, which settings need to be redone? ・Who checks the equipment, materials and job data? ・Can the demo use substrates and carton styles close to those in our own orders? When I look at post-press equipment, I ask about the changeover workflow first. The time spent resetting a machine is hard to spot from its speed alone. ## How can brand customers reduce gaps in packaging projects? Brand customers should provide the material, carton style, intended use and approved artwork version before sampling, then ask suppliers to demonstrate under those conditions. The BOBST Packaging Center tailors demonstrations to the substrate, application and production requirements, either in person or remotely. This kind of demo is useful for testing your own constraints. A general video alone is not enough to tell whether the equipment will work for you. ・Once the artwork is final, confirm the dieline, which marks the carton's cut and crease positions, and the bleed area. ・Confirm that sampling and production use the same materials and processing conditions. ・Make sure the approved artwork version matches the version listed on the print job ticket. If the packaging project also needs product information cards or brand catalogs, talk with MINDS about paper, color and finishing specifications. Add these related printed pieces to the sampling checklist from the start. ## What should print buyers take away from this showcase? The most practical takeaway is to use a real job ticket to check whether an integrated line will work for you. BOBST has brought equipment, materials suppliers and converting partners into the same showcase, and is using Demo 3.0 to discuss changeover methods. For Taiwanese printers, changeovers, first article approval and data handoffs should all be part of the evaluation. Run one real job Ask the supplier to run a job using a substrate and carton style close to your own. Then record how the first article is checked after a changeover, who handles problems, and what materials or software the equipment needs. Those are the details you can compare once you're back at the plant. The speed shown at a trade fair doesn't translate directly into savings for your operation. ## Key takeaways ・Before upgrading an integrated line, check that production stages can hand work off smoothly. ・Check whether the substrates and processing conditions used for showcase samples match your own jobs. ・Include changeover methods, first article approval and data flow in equipment evaluations. ・The version information on brand-approved artwork should match the print job ticket. ## What to consider next A factory can start by tracking the substrate, changeover, first article and finishing handoff for one frequently run job. The design team can keep the dieline and version information in the same approval file. Generative Artificial Intelligence (AI tools that create text and images from prompts) can help with brainstorming and organizing specifications. A designer should still review the work before it goes to print. Software as a Service (SaaS), software accessed online, should keep the versions, materials and equipment settings for the same job in one place, so each production stage can access the same information. ## Further reading ・[BOBST brings industry partners together at Interpack 2026 to showcase the future of packaging production](https://www.bobst.com/eu/en/news/1773842402-bobst-unites-with-industry-partners-at-interpack-2026-to-showcase-the-future-of-packaging-production) ## FAQ ### Where and when is Interpack 2026 being held? The show will take place in Düsseldorf, Germany, from May 7 to 13, 2026. ### What is a post-press line? A post-press line connects finishing equipment, material requirements and job information in a workflow that can be handed from one production stage to the next, with each stage working to the same specifications. ### What does BOBST mean by first pull right? It is a method BOBST uses in its changeover demonstrations. The goal is for the first sheets after a changeover to meet the set requirements. ### What should small and midsize printers in Taiwan ask when evaluating a post-press line upgrade? Ask the equipment supplier to demonstrate a changeover using a substrate and carton style close to your own jobs. Then check first article approval, data handoffs and material compatibility. --- > HTML version: https://mindsprt.dev/en/knowledge/bobst-interpack-2026-future-packaging/ > MINDS — 麥思印刷整合有限公司 · https://mindsprt.dev