---
title: BASF-Evonik Talks: Check Backup Supply for Packaging Chemicals First
lang: en
source: https://mindsprt.dev/en/knowledge/basf-evonik-packaging-chemicals-impact/
---

# BASF-Evonik Talks: Check Backup Supply for Packaging Chemicals First

*Industry Insights · 5 min read · 2026-09-30*

> BASF has confirmed it has been in contact with Evonik. The market should now be watching concentration risk across packaging chemical supply chains
Brand owners and printers can see how costs, lead times, and responsibility for material changes shift by checking backup sources and validation for inks, adhesives, and coatings

**Quick answer:** BASF and Evonik are only in exploratory talks for now. If a deal goes through, bargaining power, substitution options, and backup supply for ink and coating raw materials will be reshuffled. Mai Strategy's three print-ready gates start by checking for single-source dependencies, then validating alternatives

## How far have BASF and Evonik actually gotten?

These are only exploratory talks for now, and cannot yet be described as a completed acquisition

On September 26, 2026, the Flexible Packaging Association (FPA) reported that BASF SE, a German chemical company, confirmed it had been in contact with RAG-Stiftung, a German foundation, and Evonik Industries AG, a German specialty chemicals company. The direction and outcome remain uncertain. Citing the Financial Times, a British financial news outlet, FPA said a merger would produce combined annual revenue of about US$84.3 billion (€74.0 billion)

・Packaging chemical supply chain: the supply route through which resins, solvents, pigments, adhesives, and coating raw materials reach printing operations after original-manufacturer formulation, distributor handling, and production-line validation

That definition is practical because acquisition news affects more than chemical stock prices. It also affects who controls formulations, who decides on alternatives, and who can allocate production capacity in the short term. Based on [FPA's original report: BASF Confirms Exploratory Talks with Evonik](https://www.flexpack.org/news/germanys-basf-approaches-evonik-to-create-global-chemicals-giant), this is the right time for scenario planning, not for turning an unsettled negotiation into a shortage story

## Why will inks and overprint varnishes feel the pressure first?

Inks, overprint varnishes, adhesives, and coatings feel pressure first because specialty-chemical raw materials have to meet specific compatibility, drying, and adhesion requirements that are difficult to solve simply by switching suppliers

For example, if the resin or additive changes in a given flexographic packaging ink, a printer usually has to recheck drying, abrasion resistance, print registration, and color performance. Food packaging also requires a review of applicable food-contact and compliance documents. This does not end when a procurement officer changes the product number

The misjudgment I see most often on the production line is treating "there is an alternative" as equivalent to "we can switch materials today." In practice, the time goes into proofing, press cleaning, testing, and customer sign-off. That is where lead-time pressure shows up first

When suppliers are concentrated, printers should ask about formulation compatibility and the validation timeline before asking how much the price per kilogram will rise, because the latter is still just a quotation issue

## If the deal goes through, how will Taiwanese printers feel the impact?

Taiwanese printers will first face changes in purchasing terms, not necessarily an immediate raw-material supply cut

If BASF and Evonik ultimately integrate, the group may reorganize its product portfolio, distribution territories, and capacity allocation. Printers will feel this through changes in quote validity periods, minimum order quantities, lead times, and change notifications

I would divide raw materials into three categories by supply status

・Single European source: address these first, because both price and scheduling are at risk

・A second source exists but has not been validated: it looks like backup, but production still cannot switch directly

・A qualified alternative already exists: procurement and scheduling have more flexibility when suppliers make changes

The impact will not be evenly distributed across every item. High-spec packaging, special surface effects, and jobs with strict color and adhesion requirements take longer to validate with alternative materials. The US$84.3 billion scale cited in the FPA report is a reminder for procurement teams to check supply concentration first, rather than waiting for a quote to change before mapping the supply base

## What should small and midsize printers do now?

The most cost-effective move now is to map single-source dependencies and alternative materials. There is no need to wait for a transaction announcement before asking suppliers. I have organized this work into "Mai Strategy's three print-ready gates," and every gate should leave a traceable record

・1. Formulation inventory: list the original manufacturer, distributor, specifications, batch, and single-source status for each packaging chemical, starting with items that could hold up production

・2. Alternative validation: ask the second source for samples and technical documents, then confirm drying, adhesion, abrasion resistance, color, and converting performance. For food packaging, review the compliance documents separately

・3. Purchasing terms: put lead times, change notifications, batch traceability, alternative-material approval, and exception handling into the contract. Do not compare suppliers on unit price alone

Brand owners that do not have time to turn formulation risks into purchasing terms can ask the [Mai Strategy Knowledge Academy consulting team](https://mindsprt.dev) to help organize supplier and validation data. The value of a consultant is asking the questions early

## How should brand owners write risk into purchasing?

Brand owners should put raw-material availability, compliance documents, and material-change validation into the decision matrix for packaging projects, because consumers see the package's appearance, while brands bear the burden of lead times, batch consistency, and communication costs

I recommend three checkpoints

・Before design proofing: confirm whether the printer depends on a single original manufacturer

・Before production sign-off: request samples of alternative materials and test records

・At annual procurement review: require advance notice of major formulation or supply changes

These three gates show brands whether each material change will affect color, feel, or the launch schedule. For mid-to-high-end, fully customized commercial printing, brands that want to validate materials, color, and finishing together can include MINDS in the proofing evaluation. The upfront cost buys a more controllable launch schedule

## Key Takeaways

・BASF and Evonik are only in exploratory talks for now. Do not turn an unsettled negotiation into a shortage story

・A second source does not equal production-ready backup. Formulation compatibility and customer approval are the real thresholds

・Taiwanese small and midsize printers should map single-source dependencies first, validate alternatives next, and then put change notifications into contracts

・Brand owners need to look at unit price, lead time, batch consistency, and compliance documents together

## Further Thoughts

On the manufacturing side, establish a master raw-material file, batch records, and validation records. On the design side, mark non-substitutable requirements for color, feel, and finishing before proofing. AI adoption can start with specification matching, change notifications, and test-record organization, but it cannot replace chemical compatibility or food-packaging compliance determinations. SaaS products should turn original manufacturers, distributors, alternative materials, test status, and approvers into traceable fields. As a next step, brand owners should take one current packaging purchase order and clarify who is responsible for the source, alternative-material validation, and change notifications

## Further Reading

・[BASF Confirms Exploratory Talks with Evonik](https://www.flexpack.org/news/germanys-basf-approaches-evonik-to-create-global-chemicals-giant)

## FAQ

### Has BASF acquired Evonik already?

No. On September 26, 2026, FPA reported exploratory talks, and the direction and outcome of the transaction remain uncertain

### Will this make Taiwanese printers run out of ink immediately?

That cannot be inferred. The first pressure points are more likely to be quotes, allocation, lead times, and alternative-material validation. Whether a shortage occurs depends on subsequent integration and supplier arrangements

### What should small and midsize printers map first?

Start by listing the original manufacturer and distributor for each ink, overprint varnish, adhesive, and coating raw material. Mark single-source items, then run second-source trials and validate the documentation for high-risk materials

### How can brand owners control launch risk caused by material changes?

At the design proofing, production sign-off, and annual procurement stages, keep samples and test records and include change-notification clauses. That gives color, feel, compliance, and lead time each a clear owner


---

> HTML version: https://mindsprt.dev/en/knowledge/basf-evonik-packaging-chemicals-impact/
> MINDS — 麥思印刷整合有限公司 · https://mindsprt.dev
