---
title: Three Checks for Easy-Open Packaging: What Sweden's Certification Asks of Designers
lang: en
source: https://mindsprt.dev/en/knowledge/accessible-jar-closure-design/
---

# Three Checks for Easy-Open Packaging: What Sweden's Certification Asks of Designers

*File Preparation · 5 min read · 2026-10-18*

> Sonoco Orbit's easy-open jar closure has received Swedish accessibility certification, a reminder for designers to include opening in the packaging experience review. Starting with three steps, Identify, Apply Force, and Finish, this article lays out checks you can use during final artwork review, prototyping, and brand handoff

**Quick answer:** Sonoco Orbit's closure has received Swedish accessibility certification. Mai Strategy's three checks, Identify, Apply Force, and Finish, can help designers include the opening experience in final artwork review and prototyping

## What does the Swedish certification case actually tell us?

Sonoco Orbit's easy-open jar closure has received Swedish accessibility certification. That is the direct signal confirmed by this case. [Accessible Design for Easy-Open Packaging: What Does Sweden's Certification Case Signal?](https://www.packaginginsights.com/news/sonoco-orbit-accessible-jar-closure.html) reports that the certification was granted by the Swedish Rheumatism Association, the Swedish organization that provides usability certification in this case. It does not list test methods, operating force, or the groups it applies to, so "received certification" should not be rewritten as "anyone can open it easily."

Accessible packaging design means arranging packaging so that people with different levels of hand strength, dexterity, and sensory ability can recognize how to open it, then open, use, and store the product. This definition brings the closure design, operating cues, and printed instructions into one user experience.

The signal I take from this is that a packaging product has now received accessibility certification for how it opens. Designers can include opening requirements in the handoff instead of waiting until the artwork is finished to add a small icon.

## What should you check hands-on with easy-open packaging?

Check easy-open packaging in three steps: Identify, Apply Force, and Finish. Mai Strategy's "Three Checks for Easy-Open Packaging" is a working framework I recommend bringing into prototype reviews. Sonoco Orbit is an example of a closure receiving Swedish certification, but the source does not explain what the certification checks. The questions below are for design and prototyping, not a description of the certification standard.

・Identify: Can people spot where to start and which way to move? Do the icon and wording work together?

・Apply Force: Can people find a stable place to grip? Does opening require repeated pinching or twisting, or the use of a tool?

・Finish: After opening, can people access and store the product as intended? Are the instructions legible on the actual package?

Try all three on the physical sample. Handle it first. Enlarging it on a screen won't tell you enough.

## How should designers include opening instructions in final artwork?

Designers should treat opening instructions as functional packaging information and review them alongside images and text hierarchy in the final artwork, the file prepared for plate making. The Sonoco Orbit case covers an easy-open closure but provides no artwork or print specifications, so the checks below are for general design handoffs.

・Place opening text and icons where people can see them during use. Check whether fingers, a label seam, or a crop could cover them.

・Check type size, line weight, and contrast at actual size, then review again after reducing the layout. An enlarged screen view is not enough.

・Make sure arrows and step icons match the closure's actual movement. If you revise the wording, review the icons too, so the directions stay consistent.

Bleed is the extra area where a background color or image extends beyond the trim line. It still needs to follow the dieline. Bleed can reduce the chance of white edges after trimming, but it cannot fix instructions placed too close to a seam or operating point.

## How should brands and printers arrange prototyping?

Write easy-open requirements into the brief, the design and production requirements document, before prototyping. The brand, structural designer, and print supplier should spell out what each party is responsible for checking. Sonoco Orbit's certification case focuses on the closure. The source gives no information about materials, dimensions, operating force, or print layout, so adding the words "easy-open" to packaging is not enough to finish the job in Taiwan.

・The brand should explain the use case and identify the opening instructions that must stay, instead of just saying "we want it to be easy to open."

・The packaging supplier provides a structural sample. The designer adds the actual instructions to the sample, then asks someone who was not involved in the design to follow them.

・Record structural issues and print issues separately in meeting notes. For example, the operating point may need adjustment, or the instructions may be hard to read at actual size.

If the project includes label or carton printing, work with MINDS to review the paper stock, color, and finishing on the proof. Also check that the easy-open instructions have not been squeezed out during visual revisions.

## What does the Swedish case signal for teams in Taiwan?

The Swedish case is a reminder for teams in Taiwan to include the opening experience in purchasing and design specifications. It is not a conclusion about Taiwanese regulations. The available source only confirms that Sonoco Orbit's easy-open closure received Swedish accessibility certification. It provides no regulatory requirements, market size, or test data. Brands can start by including "how users open it" in the brief and acceptance criteria.

・When requesting a quote, confirm who will review the opening action and instructions.

・Include hands-on use in sample reviews, and record structural changes separately from print changes.

・Check the opening text and icons again during the final revision so approved operating information is not removed or changed.

Brands that want to turn these requirements into a purchasing brief or shared supplier checklist can discuss the fields with the [Mai Strategy Knowledge Academy consulting team](https://mindsprt.dev), giving designers a clear reference when they take over.

## Key takeaways

・The opening experience can be part of the packaging specification. The words "easy-open" alone are not enough.

・Check whether people can identify the opening method, apply force, and finish the action, then review the icons and wording.

・Review at actual size and test on a physical sample. A screen proof cannot replace a prototype.

・The Swedish certification is a concrete case. It does not establish Taiwanese regulations or market data.

## Further thoughts

Printers can add an opening-instructions check to the proofing form. Designers can review an actual-size print alongside the structural sample. AI (artificial intelligence) can help compare opening instructions before and after revisions to catch missed changes. SaaS (software delivered through a cloud subscription) can track structural samples, print files, and approved versions. Whether the package opens smoothly still has to be tested by someone handling the real thing.

## Further reading

・[Accessible Design for Easy-Open Packaging: What Does Sweden's Certification Case Signal?](https://www.packaginginsights.com/news/sonoco-orbit-accessible-jar-closure.html)

## FAQ

### Which product received Swedish accessibility certification for easy-open packaging?

Sonoco Orbit's easy-open jar closure received Swedish accessibility certification. The source says it was granted by the Swedish Rheumatism Association.

### What should you check when designing easy-open packaging?

Check whether people can identify how to open it, find a place to apply force, and access and store the product as intended after opening.

### Is adding an opening icon to the package enough?

No. The icon and wording should match the closure's actual movement, and you should check that they are clear at actual size and on a physical sample.

### Can a printer confirm on its own that packaging is accessible?

A printer can check the labels, wording, and print quality. The brand and packaging supplier still need to review the closure design together and arrange hands-on testing.


---

> HTML version: https://mindsprt.dev/en/knowledge/accessible-jar-closure-design/
> MINDS — 麥思印刷整合有限公司 · https://mindsprt.dev
